Accessories; In Case Of Damage; Electromagnetic Compatibility; Electromagnetic Emission - DENTSPLY inLab MC X5 Operating Instructions Manual

3 Safety information
3.2 Electromagnetic compatibility
Emission measurement
RF emissions according to CISPR 11
RF emissions according to CISPR 11
Harmonics
according to IEC 61000-3-2
Voltage fluctuations / flicker according
to IEC 61000-3-3
20
3.1.4

Accessories

In order to ensure product safety, this device may be operated only with
original Dentsply Sirona accessories or third-party accessories expressly
approved by Dentsply Sirona. In particular, only the power cable also
supplied or the corresponding original spare part may be used with the
unit. The user is responsible for any damage resulting from the use of
non-approved accessories.
3.1.5

In case of damage

In case of noticeable malfunctions or damage, stop using the instrument
immediately and notify your authorized dealer or the manufacturer.
3.2

Electromagnetic compatibility

3.2.1

Electromagnetic emission

The UNIT is intended for operation in the electromagnetic environment
specified below.
The customer or user of the UNIT should make sure that it is used in such
an environment.
Conformity
Group 1
Class B
Class A
coincides
Operating Instructions inLab MC X5
Electromagnetic environment - guidelines
The UNIT uses RF energy only for its internal
function. Therefore, its RF emissions are very low
and are not likely to cause any interference in
nearby electronic equipment.
The UNIT is intended for use in all facilities,
including residential areas and in any facilities
connected directly to a public power supply
providing electricity to buildings used for residential
purposes.
Dentsply Sirona
64 78 759 D3608
D3608.201.01.07.02 10.2017