Making Connections; Dentsply Sirona - DENTSPLY inLab MC X5 Operating Instructions Manual

5 Commissioning
5.1 Putting the inLab 4 PC into operation
36
5.1.1.2

Making connections

NOTICE
Do not connect and turn on the device yet!
First, connect the PC to the monitor, keyboard, and mouse.
Follow the instructions in this document exactly in order to successfully
perform start-up of your device.
You must install the user software prior to connecting the device to the
PC.
1. Connect the keyboard and the mouse to the PC.
2. Connect the monitor to the PC with the VGA/DVI cable.
3. Connect the Ethernet port on your device to the Ethernet port on your
PC.
4. Turn on the monitor and PC power supplies.
5. Turn on the power switch on the rear panel of the PC (if present).

Dentsply Sirona

Operating Instructions inLab MC X5
64 78 759 D3608
D3608.201.01.07.02 10.2017