DENTSPLY inLab MC X5 Operating Instructions Manual page 95

Dentsply Sirona
Operating Instructions inLab MC X5
64 78 759 D3608
D3608.201.01.07.02 10.2017
7.9 Procedure when processing Medentika-PreFace® abutment semi-finished products made of
5. Place the Medentika-PreFace
that the PreFace
Ensure clean contact surfaces. Make sure that the notch on the
holder is on the bottom non-engraved side of the holder. Rotate the
multi-block holder into the final position using a light rotating
movement on the holder in the block fixation until it locks into place.
®
holder into the machine. Make sure
®
holder is parallel to the base and is not slanted.
7 Maintenance and cleaning
95