After Processing / Before Changing To Processing Another Material; Retrofitting The Machine - DENTSPLY inLab MC X5 Operating Instructions Manual

Dentsply Sirona
Operating Instructions inLab MC X5
64 78 759 D3608
D3608.201.01.07.02 10.2017
7.9 Procedure when processing Medentika-PreFace® abutment semi-finished products made of
7.9.3 After processing / before changing to processing another
material
7.9.3.1

Retrofitting the machine

CAUTION
Risk of injury while reaching out to the processing chamber
There is the risk of cut injuries and crushing through sharp tools and
moving parts.
➢ Make sure that you do not touch the sharp tools and moving parts.
CAUTION
Risk of injury through cutting and grinding tools
There is risk of cuts through sharp edges of accessible parts and the use
of rotating cutting and grinding tools that are sharp and/or pointed.
CAUTION
Risk of injury through sharp-edged restorations and material residues
There is risk of injury through sharp-edged restorations as well as sharp-
edged material residues.
➢ Remove the restored objects and material residues carefully after
the processing.
➢ Pay attention to the sharp-edged material residues while cleaning
the processing chamber.
7 Maintenance and cleaning
97