Dentsply Sirona - DENTSPLY inLab MC X5 Operating Instructions Manual

Dentsply Sirona

Operating Instructions inLab MC X5
MSI MSI
MSI MSI
64 78 759 D3608
D3608.201.01.07.02 10.2017
Also required:
● VGA/DVI monitor including VGA/DVI cable (not included in scope of
supply)
CAUTION
Image may not display
Please note the required minimum monitor resolution of 1280 x 1024 at
70Hz. Please refer to the technical documentation of the monitor for the
correct resolution and frame rate settings.
Recommendation:
● Sirona inLab system PC monitor, Order No.: 60 42 548 D3446
In order to connect a VGA monitor, screw one of the two converters onto
the left DVI port as shown in the photo.
5 Commissioning
5.1 Putting the inLab 4 PC into operation
35