Page 1 TRIAD 2000 ® Light Curing System OPERATING/SERVICE MANUAL For Assistance, Call DENTSPLY Trubyte 570 West College Avenue York, PA 17405 1-800-877-0020 Technical: Ext. 4212 Clinical: Ext. 4597 Warranty/Repair Assistance: Ext. 4319 or 4581...
Page 2: Table Of Contents
Triad 2000 Power Schematic ........
Page 3: Important Information
IMPORTANT INFORMATION TRIAD UNIT: TRIAD MATERIALS: • Do not cover the Triad 2000 turntable. The Triad If uncured Triad VLC Material becomes crusty, 2000 VLC Light Curing Unit is intended for the forms a skin on its surface and becomes diffi-...
Page 4: Triad 2000 Unit General Description & Specifications
TRIAD ® 2000 LIGHT CURING UNIT GENERAL DESCRIPTION & SPECIFICATIONS The DENTSPLY Triad 2000 Light Curing Unit is CURE: On/Off switch. Activates the lamp when a precision engineered unit, constructed to exacting access door is closed. (Access door actu- specifications with the finest materials and work- ates safety interlock switch.)
Page 5: Installation
NOTE: Save shipping and packing mate- rials. If service is required at any time on your Triad 2000 unit, you are respon- sible for its safe* shipment back to DENTSPLY. This is best accomplished if the original shipping carton and pack- ing materials are used.
Page 6: Operating Procedures
CURE switch to ON, which will result in a new, full- term cycle as indicated by the TIMER. TRIAD 2000 Curing Unit 7. Open the chamber access door and remove the Lamp and Lamp Lamp Access Mounting Bracket workpiece from the processing chamber.
Page 7: Maintenance
DO NOT obstruct air flow of the cooling fan in any way. DO NOT block or otherwise defeat the access door interlock switch. DO NOT cover Triad 2000 turntable. DO NOT place any items or material on top of DO NOT immerse unit in water. the unit.
Page 8 No unusual maintenance of the unit is required This curing lamp is unique to the Triad 2000 unit. other than to keep the unit free of excessive dust and Use only the lamp specified for this unit debris.
Page 9: Troubleshooting
*NOTE: Take corrective actions only if you are experienced with electrical components and their repair. Call the DENTSPLY Trubyte Professional Services Department if you have questions. Call DENTSPLY Trubyte before you ship the unit back: 1-800-877-0020, ext. 4319 or 4581.
Page 10: Triad 2000 Parts Listing
TRIAD 2000 PARTS LISTING ® PART DESCRIPTION ITEM # Collar Lamp 60815 Door Assembly 70170 60693 Feet 17249 Protective Lens 62023 Circuit Breaker 70200 Knob (Lift) 70201 Dial (Timer) 70197 Tungsten Halogen Lamp 70353 Motor, Turntable 6069201 Transformer (Export Models Only) 70251 Screw, Knurled Thumb 6105101...
Page 11: Triad 2000 Power Schematic
TRIAD 2000 POWER SCHEMATIC ® 115V 50/60 Hz EXPORT MODELS NOTE: TRANSFORMER POWER *P/N 7021201 TIMER INPUT WILL BE IS 2-20 MINUTES CONNECTED TO ACCOMMODATE REQUIRED VOLTAGE.
Page 12: Triad 2000 Unit Warranty
THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. DENTSPLY neither assumes, nor authorizes any person to assume for it, any other liability in connection with the sale and use of the DENTSPLY TRIAD 2000 VLC Light Curing Unit.
Page 13: Appendix I: Triad Ii Operation
APPENDIX I: TRIAD II OPERATION TRIAD II owners should follow operating proce- Use the height adjustment control knobs on either dures and material curing times given for the TRIAD side of the TRIAD II Curing Unit to align material 2000 unit, and use the following sightline instruc- within the chamber.
Page 15 Manufactured by: EU Representative: DENTSPLY International Inc. DeguDent GmbH York, PA 17405-0872 Postfach 1364 • 63403 Hanau 1-800-786-0085 GERMANY Telefon +49/6181/5950 www.trubyte.dentsply.com or www.dentsply.com Printed in U.S.A. Form No. 4098-A 9/03 90119 Rev. H...