DENTSPLY inLab MC X5 Operating Instructions Manual page 64

6 Operation
6.2 Machining processes
A
64
2. Loosen the three screws (A) that are located on the fixing ring of the
workpiece holder using the torque wrench for the tool holder.
3. Turn the fixing ring counterclockwise and remove the fixing ring of the
workpiece holder.
IMPORTANT
If a positioning mark is on the work piece, always make sure it matches
precisely with the engraved mark on the workpiece holder.
Dentsply Sirona
Operating Instructions inLab MC X5
64 78 759 D3608
D3608.201.01.07.02 10.2017