Dentsply Sirona - DENTSPLY inLab MC X5 Operating Instructions Manual

6 Operation
6.2 Machining processes
62
Preparing the multi-block holder
The multi-block holder is supplied with separate spherical pressure
screws for fixing the material blocks. Use the tool for the block clamp for
this.
1. Insert the supplied spherical pressure screws in the appropriate
places of the multi-block holder and proceed with equipping.
2. Assign block placeholders to the unused positions.

Dentsply Sirona

Operating Instructions inLab MC X5
64 78 759 D3608
D3608.201.01.07.02 10.2017