DENTSPLY inLab MC X5 Operating Instructions Manual page 91

Dentsply Sirona
Operating Instructions inLab MC X5
B
C
D
64 78 759 D3608
D3608.201.01.07.02 10.2017
7.9 Procedure when processing Medentika-PreFace® abutment semi-finished products made of
1. Add one bottle of coolant lubricant additive DentaLub (REF 6597228)
to an empty tank.
2. Fill the tank with water up to the mark (max, D) (approx. 10 liters).
A
3. Place the filter system in the tank.
4. Lock the tank with the tank lid clip.
5. Reconnect the coolant drainage hose (A) with the large diameter as
well as the thin coolant supply hose (B) to the tank system.
7 Maintenance and cleaning
91