Standard Accessories; Dentsply Sirona - DENTSPLY inLab MC X5 Operating Instructions Manual

Dentsply Sirona

Operating Instructions inLab MC X5
64 78 759 D3608
D3608.201.01.07.02 10.2017
2.4.2

Standard accessories

● Power supply cable
● Filter regulator including screws
● Compressed air pipe, 3m
● Compressed air pipe opaque blue, 0.75m
● Compressed air quick-connect coupling (NW7.2 and NW5)
● Suction bend DN 40 for suction
● Suction hose mandrel suction
● Suction bellow (2 pieces per packet)
● Coolant tank assembly
● Screen insert for processing chamber
● Screen insert for plastics processing
● Maintenance kit for the HF-mandrel
● Torque wrench workpiece clamping (round/multi-block holder)
● Torque wrench chuck
● Clamping ring workpiece clamping (round/multi-block holder)
● Block holder 6x including positions for + 45/90°
● Starter set tools (Bur ZrO
PMMA 2.5/1.0/0.5)
● Tool magazine (2x)
● Color scheme kit for change magazine
● Sponge for door insert (2x)
● Foam insert accessories tray
● Auxiliary tool for removing tools from the tool magazine
● inLab CAM Software DVD including license voucher
● License stick
● Crossed LAN cable
● Technical Documents
Optional accessories
● inLab 4 PC
● Monitor
● 230 V suction device
● 120 V suction device
● inLab software DVD including inLab software license voucher
● LAN switch including LAN cable (2 m)
2 General information on the device
2.4 Technical description (component and interfaces)
2.5/1.0/0.5mm; Diamond 2.2/1.4/1.2;
2
17