Intended Use; Scope Of Supply - DENTSPLY inLab MC X5 Operating Instructions Manual

2 General information on the device
2.2 Intended use
12
2.2

Intended use

The device creates computer-supported dentures using a milling or
grinding process for work pieces or dental work from blanks in block or
disc form.
Depending on the materials to be used, the process occurs in wet or dry
operation.
This unit must not be used for any other purpose. If the unit is used for
any purpose other than the one mentioned above, it may be damaged.
Intended use also includes compliance with these Operating Instructions
and the relevant maintenance instructions.
CAUTION
Follow the instructions
If the instructions for operating the unit described in this document are
not observed, the intended protection of the user may be impaired.
CAUTION
The device may only be operated with a proper cover.
For the USA only
CAUTION: Federal law (USA) restricts sale of this device to or on the
order of a physician, dentist, or licensed practitioner.
Dry processing
CAUTION
In the event of dry processing without suction, dust can be created from
the materials being processed. Breathing in this dust can have
associated health risks. As such, observe the information and
requirements of the suction.
Dry processing is only permitted in conjunction with suction. We
recommend the Sirona suction (230V: REF 6385129, 120V: REF
6485929). If you wish to use another type of suction, please observe the
specific requirement information, (see "Suction requirements [ → 28]").
NOTICE
Before using dry processing, verify the functioning, correct connection
and the tightness of the connections. All available suction openings
must be available.
2.3

Scope of supply

The detailed scope of supply is specified in the document "Checklist".
Dentsply Sirona
Operating Instructions inLab MC X5
64 78 759 D3608
D3608.201.01.07.02 10.2017