Mounting The Drain Nozzle - Infors HT Multitron Pro Operating Manual

6.4 Mounting the drain nozzle

Procedure
Fig. 58
Fig. 59
2013-02-19
Installation and initial operation
Before commissioning, the supplied hose nozzle must be screwed
into the drain hole:
1. Unscrew the blanking plug from the drain hole.
2. Screw in the hose nozzle.
NOTICE!
To drain condensate or rinsing fluids, mount one
end of a hose onto the nozzle and place the other
end in a suitable container.
Multitron Pro - Incubation Shaker
Page 87 of 185