Infors HT Multitron Pro Operating Manual page 38

Multitron Pro - Incubation Shaker
Technical data
Adhesive matting «Sticky Stuff»
Page 38 of 185
For operating the adhesive matting «Sticky Stuff» only high quality
flasks with flat-bottom are allowed.
Following materials are permitted:
Borosilicate glass (3.3) – flasks, e.g. Schott Duran® glass
Polycarbonate – flasks, e.g. Corning®
The use of all other materials or quality levels is in the
responsibility of the user.
CAUTION!
Danger of damage of property by released or
broken flasks when using inapplicable flasks.
Flasks of bad quality or deficient contact surface
may be accidentally released from the adhesive
matting when shaking or may break at removing
process.
Therefore:
– Use only recommended flasks
– Use only flasks that are intact and free of
scratches
NOTICE!
The following speed values are only valid for flasks
with 20% filling level.
Adhesive matting and flasks have to be totally
intact, dry and fat-free.
2013-02-19