Setting The Timer For Multiple Changeovers (Cycling) - Infors HT Multitron Pro Operating Manual

Multitron Pro - Incubation Shaker
Operation

7.4.4 Setting the timer for multiple changeovers (cycling)

Fig. 83
Procedure
Page 112 of 185
The timer can be used for a cycling changeover of the cultivation
parameters after specific times.
For setting the timer for a cycling change proceed as follows:
1. Press TIMER key.
Time 1 and Time 2 light up blue.
To operate Time 1 use the upper function keys.
To operate Time 2 use the lower function keys.
2. Press upper SET key to set time for Phase 1.
Setpoint at Time 1 lights up.
3. Press upper PLUS key to set time for Phase 1.
2013-02-19