Cleaning The Housing; Cleaning The Chamber; Cleaning The Floor Pan - Infors HT Multitron Pro Operating Manual

8.11.1 Cleaning the housing

8.11.2 Cleaning the chamber

8.11.3 Cleaning the floor pan

Procedure
Fig. 108
2013-02-19
CAUTION!
Risk of material damage due to the use of
unsuitable cleaning agents.
Aggressive cleaning agents, solvents and scouring
cleaning aids (hard sponges, brushes) may scratch
and damage the surfaces and have a negative
impact on the function of the unit.
Therefore:
– Use only soft cloths.
– Use only mild household cleaners.
Wipe the housing regularly with a soft cloth and a mild household
cleaner (e.g. washing-up liquid, neutral cleaner). If necessary,
disinfect with a standard disinfectant.
Wipe the housing regularly with a soft cloth and a mild household
cleaner (e.g. washing-up liquid, neutral cleaner). If necessary,
disinfect with a standard disinfectant.
When cleaning the floor pan after a glass breakage or if culture
liquids have escaped, the table can be released from the
counterweight and tilted upwards.
Clean the floor pan as follows:
1. Open the door.
2. Switch off the unit and disconnect it from the power supply.
3. Remove the Allen screws (4) from the drive hub of the table
using the supplied Allen key.
4. Tilt the table upwards.
5. Remove any foreign objects and debris by hand.
Multitron Pro - Incubation Shaker
Maintenance
Page 151 of 185