Infors HT Multitron Pro Operating Manual page 136

Multitron Pro - Incubation Shaker
Operation
Procedure
Using the safety curtain
Fig. 90
Page 136 of 185
Set the CO gassing system as follows:
2
1. Press option key to select parameter CO
Parameter sign and unit light up.
2. Press SET key.
3. Press PLUS or MINUS key to change setpoint.
4. Press ON/OFF key to switch on parameter.
Display shows current value (e.g. 5.0%).
The safety curtain is attached to the ceiling of the incubation
chamber with four snap fasteners.
NOTICE!
The label „Outside" must face outwards.
Detaching the safety curtain
Undo each snap fastener with a gentle tug.
Attaching the safety curtain
Gently press the two halves of the snap fastener together, one by
one.
.
2
2013-02-19