Co2 Curtain; Finishing Maintenance Work - Infors HT Multitron Pro Operating Manual

Multitron Pro - Incubation Shaker
Maintenance

8.13 CO2 curtain

Procedure

8.14 Finishing maintenance work

Page 154 of 185
Clean the CO curtain as follows:
2
1. Detach the CO curtain in the incubation chamber.
2
2. Clean the surface with a soft cloth and mild cleaner (washing-
up liquid, neutral cleaner).
3. If necessary, disinfect with a standard disinfectant.
WARNING!
Risk of injury!
If protective devices on the equipment are not
brought back to their original state after
maintenance work, this carries a substantial risk of
injury at the next time of operation.
Therefore:
– Always restore all protective devices on the
equipment back to their original state after
finishing maintenance work.
2013-02-19