Ending A Work Cycle - Infors HT Multitron Pro Operating Manual

Multitron Pro - Incubation Shaker
Operation

7.7 Ending a work cycle

Procedure
Page 120 of 185
To complete or terminate a work cycle, the corresponding
parameter have to be deactivated.
1. Press option key to select the parameter.
2. Press SET key.
3. Press ON/OFF key to switch off the parameter.
The display shows OFF.
CAUTION!
Risk of material damage due to automatic start-
up of the incubator shaker.
If a work cycle is incorrectly terminated by
switching off the unit with the main switch, the unit
can restart automatically when it is switched on
again. This may damage the incubator shaker and
the cultures.
Therefore:
– Never terminate a work cycle using the main
switch of the unit
– Do not leave any objects in the incubation
chamber when the unit is switched off.
– Always make sure that the tray is inserted
correctly.
NOTICE!
Disconnect incubation shaker from power supply
when not using the unit for a longer period of time.
2013-02-19