Infors HT Multitron Pro Operating Manual page 173

2013-02-19
7. Press option key to select parameters of Phase 2.
Phase 2 lights up blue.
8. Press upper PLUS or MINUS key to set parameter Temp to
37.5 °C.
9. Press ON/OFF key to switch on parameter Temp.
10. Press lower PLUS or MINUS key to set parameter RPM to
250 RPM.
11. Press ON/OFF key to switch on parameter RPM.
12. Press option key to finish timer settings.
Current active phase blinks blue.
Incubation shaker starts after 5 minutes with current settings.
Multitron Pro - Incubation Shaker
Examples
Page 173 of 185