Operating The Timer; Displaying The Time - Infors HT Multitron Pro Operating Manual

Multitron Pro - Incubation Shaker
Operation
Setting timer for a multiple-changeover (cycling)

7.4 Operating the timer

7.4.1 Displaying the time

Display time
Page 108 of 185
Finally the setting mode of the time is closed, when the option key
is pressed. All settings will be saved without an additional
confirmation.
If Phase 1 and Phase 2 of the timer are switched on, the incubation
shaker alters between operating mode of Phase 1 and Phase 2
with the set time interval.
If Time 1 and Time 2 are switched on, the cycle symbol lights blue.
In the upper display the time of Phase 1 (Time 1) is shown.
In the lower display the time of Phase 2 (Time 2) is shown.
The duration will be displayed as follows:
From 1 up to 59 minutes
From 1 hours 00 minutes up to 23 hours 59 minutes
2013-02-19