Packaging; Transport - Infors HT Multitron Pro Operating Manual

5.3 Packaging

Packaging

5.4 Transport

2013-02-19
Transport, packaging and storage
CAUTION!
Risk of material damage – particularly the
window – due to scratches caused by using
sharp-edged or pointed tools when opening the
packaging.
Therefore:
– Do not use pointed tools to open the packaging.
Only environmental friendly packaging materials are used.
The unit and its accessories are packed in a crate (wood and/or
corrugated cardboard) on a EURO pallet.
The packaging is intended to protect the individual components
against damage during transport, etc. Therefore, do not destroy the
packaging and do not remove it just before starting initial operation.
CAUTION!
Risk of damage due to extreme localised loads.
An extreme localised load may cause the feet to
shear off or leave dents in the base plate.
Therefore:
– Never push the unit.
Owing to its weight, the incubator shaker must never be
transported or moved by one person alone.
If the unit has to be relocated over a long distance within the
building, it is essential to use a stacker truck or a trolley.
When transporting with a stacker truck, the unit must be set down
very carefully in a vertical position on the floor.
Transport on a trolley must be carried out with extreme care.
Never transport the unit without fitting the transport lock first; see
"Installation and commissioning – Fitting the transport lock".
Multitron Pro - Incubation Shaker
Page 81 of 185