Configuration > Dhcp Local Relay Settings; Configuration > Dhcpv6 Relay Settings - D-Link DGS-1210-12TS/ME User Manual

4 Configuration
Configuration > DHCP Local Relay Settings
The DHCP Local Relay Settings page allows the user to configure DHCP Local Relay. DHCP broadcasts are
trapped by the switch CPU, and replacement broadcasts are forwarded with Option 82. Replies from the
DHCP servers are trapped by the switch CPU, the Option 82 is removed and the reply is sent to the DHCP
Client.
DHCP/BOOTP Local Relay Status: Specifies whether DHCP Local Relay is enabled on the device.
Enabled – Enables DHCP Local Relay on the device.
Disabled – Disables DHCP Local Relay on the device. This is the default value.
DHCP/BOOTP Local Relay Port List: Specifies the port or ports for DHCP/BOOTP local relay port.
Config VLAN by: Configure the VLAN by VID or VLAN Name of drop-down menu.
State: Specifies whether DHCP Local Relay is enabled on the VLAN.
Enabled – Enables DHCP Local Relay on the VLAN.
Disabled – Disables DHCP Local Relay on the VLAN.
DHCP Local Relay VID List: Displays the list of VLANs on which DHCP Local Relay has been defined.
Click Apply to make the configurations take effect.
Configuration > DHCPv6 Relay Settings
The DHCPv6 Relay Settings page allows user to configure the DHCPv6 settings.
DHCPv6 Relay Status: Specifies whether DHCPv6 Relay is enabled on the device.
DGS-1210 series Metro Ethernet Managed Switch User Manual
Figure 4.95 - Configuration > DHCP Local Relay Settings
Figure 4.96 - Configuration > DHCPv6 Relay Settings
68