Table of Contents
Advertisement
Section 3 - Configuration
Select Auto Configuration if your ISP assigns an IPv6 address when your router requests one from the ISP's server. Some
ISPs require you to configure relevant settings in advance before your router can connect to the IPv6 Internet. Click Save at
any time to save the changes you have made on this page.
DNS Type
Select either Obtain DNS server address automatically or
Use the following DNS address.
Primary DNS Server
If you select Use the following DNS address, enter the
primary DNS server address.
Secondary DNS Server
If you select Use the following DNS address, enter the
secondary DNS server address.
Enable DHCP-PD
Enable or disable prefix delegation.
LAN IPv6 Link-Local
Displays the router's LAN link-local address.
Address
If Enable DHCP-PD is disabled, configure the following:
LAN IPv6 Address
Enter a valid LAN IPv6 address.
LAN IPv6 Link-Local
Displays the router's LAN link-local address for the local
Address
network only.
D-Link G403 User Manual
IPv6 - Auto Configuration (SLAAC/DHCPv6)
IPv6 DNS Settings
LAN IPv6 Address Settings
39
Advertisement
Table of Contents
