Lldp Port Settings - D-Link xStack Reference Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch WEB UI Reference Guide

LLDP Port Settings

To view this window, click L2 Features > LLDP > LLDP Port Settings:
The following parameters can be set:
Parameter Description
From Port/To
Use the pull-down menu to select a range of ports to be configured.
Port
Notification
Use the pull-down menu to enable or disable the status of the LLDP notification. This function
controls the SNMP trap, however it cannot implement traps on SNMP when the notification is
disabled.
Admin Status
This function controls the local LLDP agent and allows it to send and receive LLDP frames on
the ports.
This option contains Tx, Rx, Tx and Rx or Disabled.
Tx: the local LLDP agent can only transmit LLDP frames.
Rx: the local LLDP agent can only receive LLDP frames.
Tx and Rx: the local LLDP agent can both transmit and receive LLDP frames.
Disabled: the local LLDP agent can neither transmit nor receive LLDP frames.
The default value is Tx and Rx.
Subtype
This read-only field displays IPv4, the type of the IP address.
Action
Used to Enable or Disable the advertise management address function base port.
Address
The address must be the management IP-address. For multi IP-addresses, you can enter any IP
or create a new IP interface that you want to add.
Click Apply to implement changes made.
Figure 3 - 53. LLDP Port Settings window
108