L2 Features > Fdb > Mac Address Table; L2 Features > 802.1Q Vlan - D-Link DMS-1100-10TS User Manual

Click Apply to make the configurations take effect.
L2 Features > FDB > MAC Address Table
The MAC Address Table page allows user to view the entries listed in the MAC address table.
The fields that can be configured for MAC Address Table are described below:
Item
Port
VID (1-4094)
MAC Address
Click the Find button to locate a specific entry based on the information entered.
Click the Clear Dynamic by Port button to clear the dynamic MAC address listed on the corresponding port.
Click the Clear Dynamic by VLAN button to clear the dynamic MAC address listed on the corresponding
VLAN.
Click the Clear Dynamic by MAC button to clear the dynamic MAC address entered.
Click the Find button to locate a specific entry based on the information entered.
Click the Clear All button to clear all dynamic MAC addresses.
Click the View All button to display all the MAC addresses recorded in the MAC address table.
L2 Features > 802.1Q VLAN
The 802.1Q VLAN page allows user to view and configure the VLAN settings on this switch.
specified ports.
Table 4.37
Figure 4.59 – L2 Features > FDB > MAC Address Table
Description
Select the port that will be used for this configuration.
Enter the VLAN ID that will be used for this configuration.
Enter the MAC address that will be used for this configuration.
Table 4.38
Figure 4.60 – L2 Features > 802.1Q VLAN
50
D-Link DMS-1100 Series User Manual