The following table provides a list of fields in the ETR Interface form and their descriptions:
Table 51: ETR Interface Form Parameters
Field
Port Identifier
ETR Mode
ETR State
The Services Interface
The Services port cannot be configured through the Avaya G250/G350/G450 Device Manager.
The Services port allows an Out Of Band management interface to the Avaya G450 Device.
The following table displays the fixed values of the Services port.
Table 52: Fixed Parameters for the Services Port
Parameter
IP Address
Port Type
Port Functionality
Administrative Status
Operational Status
Auto Negotiation Mode
Description
The port identifier string (not relevant for the Avaya G450 Device).
The mode of operation.The status of Dynamic CAC on the WAN
interface. Possible values are:
Auto
●
Manual On
●
Manual Off
●
The current ETR state of operation (not relevant for the Avaya G450
Device).
Value
192.11.13.6
10/100 BaseTX
100 mbit/sec or 10 mbit/sec
Enabled
Possible values are:
Up
●
Down
●
Enabled
The Services Interface
Issue 5 October 2007
143