Configuring The Converged Network Analyzer Application - Avaya Media Gateway G350 User Manual

The following table provides a list of the fields in the TFTP Server Configuration dialog box and
their descriptions:
Table 59: TFTP Server Configuration Fields
Field
Mode
NVRAM Total Bytes
Used
NVRAM Total Bytes
Capacity
RAM Total Bytes
Used
RAM Total Bytes
Capacity
For more information on the user interface, refer to

Configuring the Converged Network Analyzer Application

Converged Network Analyzer (CNA) is a distributed system for real-time monitoring of IP
networks, using active measurements. CNA can run connectivity tests with pings, topology tests
with traceroute, and QoS tests with synthetic RTP streams. Test plugs are entities within the
CNA system that receive instructions from a Scheduler for running tests, perform the tests, and
send back the results.
The following options are available for configuring Converged Network Analyzer on the Avaya
G250/G350/G450 Device:
Configuring an External Test Plug
●
Configuring Schedulers
●
To access and configure the Converged Network Analyzer application:
Select Configure > CNA. The CNA Configuration dialog box opens.
Configuring the Converged Network Analyzer Application
Description
Administrative status of the TFTP service. Possible values are:
Enable
●
Disable
●
Total bytes used for scripts in NVRAM.
Total byte capacity for scripts in NVRAM.
Total bytes used for scripts and images in RAM.
Total byte capacity for scrips and images in RAM.
- Configuration information for an external test plug.
- Scheduling information for the test plugs.
"Using Dialog Boxes and Tables" on page
Issue 5 October 2007
32.
161