Table 65: Port Redundancy Fields (continued)
Field
Primary
Secondary
Switch Over (sec)
Switch Back
To configure the device's port redundancy configuration:
1. Enter an amount in the Switch Over field to determine initial switching time between ports
in a port redundancy pair.
2. Select one of the Switch Back option buttons.
3. If you selected After x sec, enter the number of seconds for the switch back in the After x
sec field.
4. Update the device. For more information on updating the device, refer to
Device" on page
Adding a Port Redundancy
To add a new Port Redundancy:
1. From the Port Redundancy dialog box, click Wizard. The Port Redundancy Wizard starts.
For more information, refer to
Or
From the Port Redundancy dialog box, click Insert. A row is added to the Port Redundancy
dialog box.
2. Enter a name for the Port Redundancy in the Name field.
Description
The primary port of the port redundancy pair.
The secondary port of the port redundancy pair.
The minimum time between switching between the ports in a port
redundancy pair.
The amount of time after the primary port link is reestablished after
which the primary port takes over from the secondary port. Possible
values include:
Disabled - The primary port does not take over from the
●
secondary port.
Immediately - The primary port takes over from the
●
secondary port as soon as the primary port link is
reestablished.
After x sec- The primary port takes over from the secondary
●
port x seconds after the primary port link is reestablished.
202.
"Port Redundancy Wizard" on page
Adding a Port Redundancy
2 of 2
"Updating the
196.
Issue 5 October 2007
195