Power over Ethernet
The following table provides a list of the fields in the Power tab of the Module Configuration
dialog box and their descriptions:
Table 21: Port Configuration - Power Fields
Field
Administrative
Status
Detection Status
Power Priority
Power Consumption
(mW)
70 Avaya Integrated Management Release 4.0.1 Software Update Manager
Description
The administrative state of the port in terms of power management.
Possible states include:
Enable - This port can supply power to IP telephones.
●
Disable - This port cannot supply power to IP telephones.
●
The operational status of port power detection. Possible states
include:
Searching - This port is currently being polled.
●
Delivering Power - This port is supplying power to an IP
●
telephone.
Fault - This port is currently not supplying power to an IP
●
telephone due to a fault condition on the port.
Disabled - This port is currently not configured to supply
●
power to an IP telephone.
Test - This port is being tested for its ability to deliver power.
●
Other Fault - This port is currently not delivering power to an
●
IP telephone due to a fault condition other than on the port.
The priority of the port in terms of power management. When the
demand for power exceeds the modules capacity, ports with lower
priority will be prevented from supplying power before ports with a
higher priority. Possible priorities include:
Critical
●
High
●
Low
●
The power consumption of the port in milliwatts.