Avaya Media Gateway G350 User Manual page 112

WAN Configuration
The following table provides a list of the fields in the Frame Relay tab of the Channel Group
dialog box and their descriptions:
Table 41: Channel Group Dialog Box - Frame Relay Parameters
Field
LMI Type
LMI Auto Sense
Operational Status
MTU (octets)
112 Avaya Integrated Management Release 4.0.1 Software Update Manager
Description
Local Management Interface Type. The Data Link Connection
Management scheme used by the frame relay interface. Possible
values are:
ANSI
●
q933a
●
lmi-rev1
●
Local Management Interface Auto-Sensing is a method for
automatically determining the LMI Type for the interface. Possible
values are:
Enable
●
Disable
●
The operational status of the interface. Possible statuses include:
Up - The interface is up and can transmit and receive
●
packets.
Down - The interface is down due to some failure, and cannot
●
transmit or receive packets.
Testing - The interface is in testing mode and cannot transmit
●
or receive regular data.
Standby - The interface is a backup interface and cannot
●
transmit or receive packets unless the primary interface it
backs up fails.
Disabled - The interface is disabled. It cannot transmit or
●
receive packets.
Partially Down - The interface is up. However, some
●
interfaces (or PVCs) layered on top of this interface are
Down. Some packets can be transmitted and received.
The size (in octets) of the largest datagram that can be sent via the
interface.
1 of 2