Avaya Media Gateway G350 User Manual page 115

To delete a Frame Relay sub-interface:
1. Click the Frame Relay sub-interface you want to delete.
Note:
You can only delete Frame Relay sub-interfaces on which no IP interfaces are
Note:
defined.
2. Click Delete.
3. Click Apply. The Frame Relay sub-interface is deleted.
The following table provides a list of the fields in the Frame Relay sub-interfaces tab of the
Channel Group dialog box and their descriptions.
Table 42: Channel Group Dialog Box - Sub-Interfaces Parameters
Field
Name
Description
Type
Bandwidth (kb/s)
Administrative
Status
Operational Status
DLCIs
Description
The name of the interface.
A user defined description of the Sub-Frame-Relay.
The type of Frame Relay sub-interface. Currently, only Point to Point
interfaces are supported.
The bandwidth of the Frame Relay sub-interface in bits per second.
The administrative status of the interface. Possible statuses include:
Enable
●
Disable
●
The operational status of the Frame Relay sub-interface. Possible
statuses include:
Up - The interface is up and can transmit and receive packets.
●
Down - The interface is down due to some failure, and cannot
●
transmit or receive packets.
Testing - The interface is in testing mode and cannot transmit
●
or receive regular data.
Standby - The interface is a backup interface and cannot
●
transmit or receive packets unless the primary interface it
backs up fails.
Disabled - The interface is disabled. It cannot transmit or
●
receive packets.
Partially Down - The interface is up. However, some
●
interfaces (or PVCs) layered on top of this interface are Down.
Some packets can be transmitted and received.
A list of all DLCIs associated with the Sub-Frame-Relay interface.
If more than one DLCI is configured on the Sub-Frame-Relay
interface, priority DLCI is active. The first DLCI is for high priority
traffic, the second DLCI is for medium priority traffic, etc.
Viewing Channel Group Information
Issue 5 October 2007
1 of 2
115