Configuring Dhcp Assignment Parameters - Avaya Media Gateway G350 User Manual

The following table provides a list of the fields in the DHCP Server Configuration - Pool
Configuration Tab and their descriptions:
Table 57: DHCP Server Configuration - Pool Config Tab Fields
Field
Name
Mode
Start IP Address
End IP Address
Lease (Seconds)
Client Identifier
Bootfile
Next Server
Server Name
To refresh the field information, click Refresh. To apply changes to the pool, click Apply.

Configuring DHCP Assignment Parameters

The DHCP Server - General DHCP Options Config Tab provides options for configuring
parameters to be assigned to a remote station requesting network parameter information from
the DHCP service.
To open the DHCP Server Configuration - General DHCP Options Config Tab:
Click a specific pool entry in the All DHCP Pools tree.
Description
Name of the selected pool.
Administrative status of the DHCP pool. Possible options are:
Enable
●
Disable
●
First IP address assigned in the DHCP pool.
Last IP address assigned in the DHCP pool.
Amount of time a client holds an allocation from DHCP before
needing to make a new request.
String identifying client station as eligible to receive allocation from
the DHCP pool.
Bootfile assigned by DHCP.
The next server to service DHCP allocations if this server is not
available.
The network name of the DHCP server. This field is optional.
Default: None
Configuring the DHCP Server
Issue 5 October 2007 157