Note:
The available values of Layer 2 Interface Name do not include the Layer 2
Note:
interface on which dynamic IP address are defined.
You can create, modify, or delete DHCP/BOOTP parameters. For more information on editing
tables, refer to
RIP
The RIP folder provides access to the following windows:
Viewing RIP Global Parameters
●
Configuring RIP Interfaces
●
Viewing RIP Global Parameters
To display and update RIP global parameters:
Select IP Route > RIP > RIP Global Parameters. The RIP Global Parameters window
opens.
Figure 106: RIP Global Parameters Window
"Editing Tables" on page
210.
Issue 5 October 2007
RIP
235