Configuring Ospf Interfaces - Avaya Media Gateway G350 User Manual

IP Route
Table 81: OSPF Global Parameters (continued)
Field
Redistribute Static
into OSPF
Redistribute Direct
into OSPF
You can modify OSPF Global Parameters.
Note:
After updating the Router ID field, a message is displayed warning that the
Note:
operation might cause the OSPF database to reset.

Configuring OSPF Interfaces

To define and display OSPF interfaces:
Select IP Route > OSPF > OSPF Interfaces. The OSPF Interfaces window opens.
Figure 109: OSPF Interfaces Window
The following parameters are displayed:
Table 82: OSPF Interfaces
Field
IP Interface Name The name assigned to the selected IP interface.
IP Address
Reference IP
Address
240 Avaya Integrated Management Release 4.0.1 Software Update Manager
Description
Controls redistribution of static routes into OSPF. If checked, routes
are advertised into OSPF as external routes, according to the "Leak
Route" definition for each static route.
Controls redistribution of direct routes which are external to OSPF. If
checked, local subnets on which OSPF is disabled are advertised into
OSPF as external routes.
Description
The IP address of this OSPF interface.
For an unnumbered IP interface, this field returns a value of N/A.
The IP address borrowed for an unnumbered interface.
A value of 0.0.0.0 indicates either that the IP address is not valid, or that
the IP interface is borrowing the IP address from a dynamic IP interface
whose IP address is not yet allocated.
If the IP address is not unnumbered, this field returns a value of N/A.
2 of 2
1 of 3