Avaya Media Gateway G350 User Manual page 59

Figure 17: Port Configuration Dialog Box - LLDP Tab
The following table provides a list of the fields in the LLDP tab of the Port Configuration dialog
box and their descriptions:
Table 16: Port Configuration Dialog Box - LLDP Tab Parameters
Field
LLDP Admin Status
LLDP TLVs Transmission
System Name
System Description
System Capabilities
Port Description
Description
The status of LLDP mode on the device. Possible values are:
Tx Only - LLDP mode is enabled, and is configured to only
●
accept Tx traffic.
Rx Only - LLDP mode is enabled, and is configured to only
●
accept Rx traffic.
Tx and Rx - LLDP mode is enabled and is configured to
●
accept both Tx and Rx traffic.
Disabled - LLDP mode is disabled.
●
The system's network name. When checked, the system advertises
its name to the network.
A brief description of the system (i.e., G250/G350/G450). When
checked, this TLV is advertised.
A brief description of the system's capabilities. When checked, this
TLV is advertised.
A brief description of the device port. When checked, this TLV is
advertised.
Viewing Port Configuration
1 of 2
Issue 5 October 2007 59