Table 41: Channel Group Dialog Box - Frame Relay Parameters (continued)
Field
Last Fault Message
Time Since Fault
Backup Interface
Sub-Interfaces
The Sub-Interfaces tab of the Channel Group dialog box provides information about the
configuration of Frame Relay sub-interfaces in the Channel Group.
To view the Sub-Interfaces tab of the Channel Group dialog box:
1. Click a Channel Group icon in the Chassis View. A list of Channel Groups on the port
appears.
2. Click the Channel Group you want to configure. The Channel Group dialog box opens with
the Channel Group tab.
3. Click Sub-Interfaces. The Sub-Interfaces tab of the Channel Group dialog box opens.
Description
The type of error last occurring on the interface. Possible values are:
Unknown Error
●
Receive Short
●
Receive Long
●
Illegal Address
●
Unknown Address
●
DLCMI Protocol Error
●
DLCMI Unknown IE
●
DLCMI Sequence Error
●
DLCMI Unknown Rpt
●
No Error Since Reset
●
The amount of time the system was up before the last error
occurred.
The interface's backup status. Possible statuses include:
Backup By - Interface x - The selected interface is backed
●
up by interface x.
Backup Of - Interface x - The selected interface is the
●
backup interface for interface x.
N/A - The selected interface is not participating in a backup
●
scheme.
Viewing Channel Group Information
Issue 5 October 2007
2 of 2
113