Viewing The Dynamic Ip Interfaces Table - Avaya Media Gateway G350 User Manual

IP Route
Note:
The list of VLANs allocated in the system is displayed in the
Note:
Layer 2 Interface Name field.
Note:
IP Address for unnumbered interfaces or for interfaces receiving their IP address
Note:
from a DHCP server or IPCP session cannot be modified.
There are certain constraints when configuring IP static or unnumbered interfaces. After clicking
Apply in the IP Interfaces window, the software checks your configuration and displays error
messages if applicable. The following table lists the possible errors and their descriptions:
Table 71: Error Messages
Error Text
The Reference Layer 2 interface cannot be
used because it is configured with IP
unnumbered interface
There is already another IP unnumbered
interface on the layer 2 interface
There is already another IP static interface
on the layer 2 interface
There is already another IP unnumbered
interface on the layer 2 interface.
The Reference Layer 2 Interface has no
Valid IP address

Viewing the Dynamic IP Interfaces Table

This table allows configuration of ICMP-redirect only. You cannot add/delete rows in the table.
To display the dynamic IP interfaces:
Select IP Route > Dynamic IP Interfaces. The Dynamic IP Interfaces Table window opens.
Figure 97: Dynamic IP Interfaces Table
222 Avaya Integrated Management Release 4.0.1 Software Update Manager
Description
Reference Layer 2 Interface points to an IP
unnumbered interface.
Layer 2 interface is already configured as an IP
unnumbered interface, and you attempt to
configure Layer 2 interface with a static IP.
Layer 2 interface is already configured with a static
IP, and you attempt to configure Layer 2 interface
as an IP unnumbered interface.
Layer 2 interface is already configured as an IP
unnumbered interface, and you attempt to add an
IP unnumbered interface.
Reference Layer 2 interface is not configured, and
you attempt to add an IP unnumbered interface.