Viewing Module Configuration - Avaya Media Gateway G350 User Manual

Table 11: Device Configuration Fields - 802.1x Tab (continued)
Field
Num of Supplicants
per Port
802.1x LLDP
Transmitted
VLAN-IDs
Max Number of
Supplicants
Current Number of
Supplicants
Authenticated
Supplicants
Authenticating
Supplicants

Viewing Module Configuration

The Module Configuration dialog box provides you with information specific to a selected
module.
Module Configuration - General Tab
●
such as the module's position in the device, the module's type, description, number of
ports, mode of operation, and any faults occurring on the module.
Module Configuration - Power Tab - Provides information about the module's Power over
●
Ethernet (PoE) configuration. For more information, refer to
page 67.
Note:
The information fields in the Module Configuration dialog box vary according to
Note:
the type of module selected.
Description
Number of supplicants per port allowed in
MAC-Based-Authentication. This parameter is not relevant in
port-based-authentication mode.
Possible values are 1-8. The default value is 2.
When enabled, allows transmission of port LLDP information (PVID,
Port Vlan) in the LLDP packet sent to the Avaya IP phone connected
to the port.
The device/system maximum number of supplicants.
The current number of supplicants connected to the device/system.
The number of authenticated supplicants connected to the device/
system.
Number of supplicants connected to the device/system being
authenticated (not authenticated yet).
- Provides detailed information about the module,
Viewing Module Configuration
"Power over Ethernet" on
Issue 5 October 2007
2 of 2
45