Channel Group - Frame Relay Information - Avaya Media Gateway G350 User Manual

WAN Configuration
Table 40: Channel Group Dialog Box - PPP Parameters (continued)
Field
Operational Status
IPCP Status
Backup Interface

Channel Group - Frame Relay Information

The Channel Group dialog box for Channel Groups using frame relay contains five tabs:
Channel Group
●
in the Channel Group tab of the Channel Group - Frame Relay dialog box, refer to
"Channel Group" on page
Advanced
●
information on the fields in the Advanced tab of the Channel Group - Frame Relay dialog
box, refer to
Frame Relay
●
110 Avaya Integrated Management Release 4.0.1 Software Update Manager
Description
The operational status of the PPP interface. Possible statuses
include:
Up - The interface is up and can transmit and receive packets.
●
Down - The interface is down due to some failure, and cannot
●
transmit or receive packets.
Testing - The interface is in testing mode and cannot transmit
●
or receive regular data.
Standby - The interface is a backup interface and cannot
●
transmit or receive packets unless the primary interface it
backs up fails.
Disabled - The interface is disabled. It cannot transmit or
●
receive packets.
Partially Down - The interface is up. However, some
●
interfaces (or PVCs) layered on top of this interface are Down.
Some packets can be transmitted and received.
IP Control Protocol. The state of IPCP for this PPP session. Possible
statuses include:
Open - IP packets can be transmitted and received over the
●
PPP session.
Not-Opened - IP packets cannot be transmitted and received
●
over the PPP session.
The interface's backup status. Possible statuses include:
Backup By - Interface x - The selected interface is backed
●
up by interface x.
Backup Of - Interface x - The selected interface is the
●
backup interface for interface x.
N/A - The selected interface is not participating in a backup
●
scheme.
- Basic information about the Channel Group. For information on the fields
105.
- Information about the channels that comprise the Channel Group. For
"Advanced" on page
- Information about frame relay on the Channel Group.
107.
2 of 2