Avaya Media Gateway G350 User Manual page 40

Device Configuration
Table 9: Device Configuration Fields - Advanced Tab (continued)
Field
STP Version
STP Max Age
STP Hello Time
STP Forward Delay
STP Bridge Max Age
STP Bridge Hello
Time
STP Bridge Forward
Delay
Aging Time (sec)
LLDP Mode
LLDP Tx Interval
LLDP Tx Hold
Multiplier
LLDP Tx Delay
LLDP Re-Init Delay
For more information on the user interface, refer to
page 32.
40 Avaya Integrated Management Release 4.0.1 Software Update Manager
Description
Version of Spanning Tree on the device. Possible values are:
STP Compatible
●
RSTP Rapid Spanning-Tree Protocol
-
●
The maximum amount of time before the Spanning Tree table
recalculates if there is no change in the device status, measured in
milliseconds.
The amount of time between sending Spanning Tree updates if
there are no detected changes in the device's network connections,
measured in milliseconds.
The amount of time for the device to begin forwarding packets when
first joining a network, measured in milliseconds.
The maximum amount of time before Spanning recalculates if there
is no change in network bridging status, measured in milliseconds.
The amount of time between sending Spanning Tree updates if
there are no detected changes in the overall bridged network
topology, measured in milliseconds.
The amount of time for the device to begin forwarding packets after
recalculating its Spanning Tree table based on a change in network
topology, measured in milliseconds.
The amount of time MAC addresses remain in the CAM table.
The status of Link Layer Discovery Protocol (LLDP) Mode on the
device:
Enable - Use LLDP Mode.
●
Disable - Do not use LLDP Mode.
●
The amount of time between packet transmissions on the device.
The LLDP time-to-live value expressed as a multiple of the value
configured in the LLDP Tx Interval field.
The delay between successive LLDP frame transmissions initiated
by status changes in LLDP.
The amount of time the device is instructed to wait before
re-initiating LLDP.
Standard Spanning-Tree Protocol
-
"Using Dialog Boxes and Tables" on
2 of 2