Policy Based Routing
Note:
If a route is not selected, the moved route will be added to the bottom of the table.
Note:
Deleting Routes
To delete a route:
1. Select a route from the Next Hop table.
To select more than one route, press SHIFT while selecting additional routes.
2. Click
3. Click
Note:
Commit changes to the module to ensure that all changes are permanently
Note:
saved.
Policy Enforcement Points
The Policy Enforcement Points (PEPs) table allows you to add, modify, move, and delete
policies to an interface. This section provides a description of the Policy Enforcement Points list.
Figure 123: Policy Enforcement Points Table
The Policy Enforcement Points Table allows you to apply PBR lists to specific interfaces in
Avaya G250/G350/G450 Policy Based Routing. The following interfaces are supported:
Vlan
●
Wan Fast Ethernet
●
Tunnel
●
Dialer
●
Loopback
●
Serial
●
268 Avaya Integrated Management Release 4.0.1 Software Update Manager
. The route is marked for deletion, and an
. The route is deleted from the table, and the Table View is refreshed.
appears next to the route.