Avaya Media Gateway G350 User Manual page 97

Table 35: Ethernet WAN Port Configuration - General Tab (continued)
Field
Encapsulation
Traffic Shaper Rate
(bps)
VoIP Queue
Description
The WAN encapsulation method of the selected port. Possible values
are:
ARPA - The port uses the ARPA protocol to establish a
●
connection.
PPPoE - The port uses PPP over Ethernet to establish a
●
connection.
Note:
This field is read-only.
Note:
Reserved bandwidth for VoIP traffic.
Possible values are:
Integer values in the range 64000 - 2048000
●
Disable
●
The state of VoIP queuing. VoIP queuing changes the length of the
high priority queue providing support for the configuration of a
maximum VoIP delay. Possible states include:
On- Standard VoIP queuing is active.
●
Off - VoIP queuing is not active.
●
Fair-VoIP Queue
●
Note:
This option is not available when Traffic Shaper Rate
Note:
is set to Disable.
Ethernet WAN Port Configuration
VoIP fair queuing is active.
-
3 of 3
Issue 5 October 2007 97