Avaya Media Gateway G350 User Manual page 274

Policy Based Routing
The following table provides a list of the fields in IP Simulate and their descriptions:
Table 99: IP Simulate Fields
Field
Source IP
Destination IP
Source Application
Destination
Application
Protocol
Src. Port
Dst. Port
TCP connection
established
ICMP type/code
IP Option
IP fragments
274 Avaya Integrated Management Release 4.0.1 Software Update Manager
Description
The IP address of the device from which the simulated packet
originated.
The IP address of the device to which the simulated packet is
addressed.
The application from which the simulated packet was sent.
Select an application from the pull-down list or select custom and
define the Protocol and Port fields.
The application to which the simulated packet is being sent.
Select an application from the pull-down list or select custom and
define the Protocol and Port fields.
The number of the application protocol. The number can be in the
range of 0-255.
TCP - The protocol number is 6.
●
UDP - The protocol number is 17.
●
A specific application source.
When combined with the protocol number this identifies the
application from which the packet was sent.
A specific application destination.
When combined with the protocol number, this identifies the
application to which the packet was sent.
The type of session to which the rule applies.
If checked, the simulated packet is from an established session. An
established session occurs when the packets entering the module
respond to a previously established communications session.
If unchecked, the simulated packet is from a not established session.
Type of ICMP packet to be used in this simulation. For possible
values, refer to Appendix C:
page 293.
Enables setting of IP Fragmentation options.
Options for IP packet fragmentation. Possible values are:
Not fragmented
●
First packet fragmented
●
Packet fragmented non-l4
●
"ICMP Packet Types & Codes" on
1 of 2