The following parameters are displayed:
Table 75: ARP Parameters
Field
IP Address
MAC Address
Layer 2 Interface
name
Status
You can create or delete ARP table entries. For more information on editing tables, refer to
"Editing Tables" on page
You can limit the table entries displayed. To start the display of entries from a specified interface
and IP address:
1. Click
.
Or
Select Action > Start Point. The Start Point dialog box opens.
Figure 102: ARP Table Start Point Dialog Box
2. Enter an IP address in the IP Address field.
3. Select an interface from the If Name listbox.
4. Click OK. The ARP Table displays entries starting with the specified IP address and
interface.
Description
The IP address of the station.
The MAC address of the station.
The name of the interface.
The status of the interface. Possible status values are:
Dynamic - The entry is learned from the ARP protocol. If the
●
station entry is not active for a predetermined time, the entry is
deleted from the table.
Static - The entry has been configured by the network
●
management station and is permanent.
Invalid - The entry in the table is invalid.
●
210.
Viewing the ARP Table
Issue 5 October 2007
229