Avaya Media Gateway G350 User Manual page 220

IP Route
Table 70: IP Interface Table Parameters (continued)
Field
IP NetMask
Layer 2 Interface
name
Reference Layer 2
Interface Name
Type
Status
Oper Status
Directed Broadcast
220 Avaya Integrated Management Release 4.0.1 Software Update Manager
Description
The IP network mask of the attached net/subnet.
The name of the Layer 2 interface with which this subnet is
associated. Multiple subnets may be associated with a single VLAN,
so multiple IP interfaces may be associated with the same If Name.
Note:
For unnumbered IP interfaces, this field shows only
Note:
point-to-point interfaces such as GRE tunnel, Serial
Interface, and Dialer.
An 'alias' name for the lower layer interface used to borrow an
unnumbered IP address. To designate the interface as unnumbered,
enter a reference interface name. If the IP address is not unnumbered
this field returns a value of N/A.
Note:
An unnumbered IP interface cannot point to another
Note:
unnumbered IP interface.
The type of IP address assignment on the interface. Possible values
are:
Static - The address is assigned by user configuration.
●
DHCP/IPCP - The address is assigned remotely by a DHCP
●
server or IPCP session. The DHCP/IPCP values are read only;
they can be changed in the Dynamic IP Interfaces table (refer to
"Viewing the Dynamic IP Interfaces Table" on page
Unnumbered - The interface is unnumbered and has no IP address.
The status of the IP interface. If checked, the IP interface is enabled.
The operational status of the IP interface.
When enabled, the router forwards directed broadcasts to an attached
network.
Note:
This field is only available when additional parameters
Note:
are selected. To select additional parameters,
click on the Routing Manager Application Toolbar.
222).
2 of 3