WAN Configuration
Table 48: USP Dialog Box - Frame Relay Parameters (continued)
Field
Last Fault Message
Time Since Fault
Backup Interface
Sub-Frame-Relays
The Sub-Interfaces tab of the USP dialog box provides information about the configuration of
Frame Relay sub-interfaces in the USP.
To view the Sub-Interfaces tab of the USP dialog box:
1. Click a USP symbol in the Chassis View or Tree View. The USP dialog box opens with the
Serial Port tab.
2. Click Sub-Interfaces. The Sub-Interfaces tab of the USP dialog box opens.
136 Avaya Integrated Management Release 4.0.1 Software Update Manager
Description
The type of error last occurring on the interface. Possible values are:
Unknown Error
●
Receive Short
●
Receive Long
●
Illegal Address
●
Unknown Address
●
DLCMI Protocol Error
●
DLCMI Unknown IE
●
DLCMI Sequence Error
●
DLCMI Unknown Rpt
●
No Error Since Reset
●
The amount of time the system was up before the last error
occurred.
The interface configured to back up this interface.
2 of 2