Avaya Media Gateway G350 User Manual page 152

WAN Configuration
The following table provides a list of the fields in the Dynamic CAC dialog box and their
descriptions.
Table 54: Dynamic CAC Dialog Box
Field
Status
RBBL (kbps)
Last Update (sec)
Interface
CAC BBL (kbps)
CAC Priority
Status
152 Avaya Integrated Management Release 4.0.1 Software Update Manager
Description
The status of Dynamic CAC on the WAN interface. Possible values
are:
Active - Dynamic CAC is active on the WAN interface.
●
Not Configured - Dynamic CAC is not configured (but is
●
supported) for the WAN interface.
Not Armed - Dynamic CAC is not armed (but is supported
●
and configured) for the WAN interface.
Armed Not Configured - Dynamic CAC is armed (and
●
supported, but not configured) for the WAN interface.
Not Supported - Dynamic CAC is not supported for the WAN
●
interface.
Note:
This field is read-only.
Note:
Remote Bearer Bandwidth Limit. RBBL is the amount of bandwidth
available for CAC on the remote controller.
Note:
This field is read-only.
Note:
The last time the CAC values were updated (in seconds).
Note:
This field is read-only.
Note:
The local WAN interface supporting Dynamic CAC. Possible values
are:
Fast Ethernet
●
Serial
●
Tunnel
●
The local interface bandwidth threshold after which CAC is
activated.
The CAC activation priority.
Operational status of Dynamic CAC. Possible values are:
Not Configured
●
Active
●
Not Active
●
Active ECMP
●
Not Supported
●