Channel Group - Frame Relay Information - Avaya C360 Manager User Manual

Chapter 7

Channel Group - Frame Relay Information

The Channel Group dialog box for Channel Groups using frame relay
contains five tabs:
90
Table 7-3. Channel Group Dialog Box - PPP Parameters (Continued)
Field
Operational Status
IPCP Status
• Channel Group
For information on the fields in the Channel Group tab of the
Channel Group - Frame Relay dialog box, refer to
Group" on page
Description
The operational status of the PPP interface.
Possible statuses include:
• Up - The interface is up and can transmit
and receive packets.
• Down - The interface is down due to
some failure, and cannot transmit or
receive packets.
• Testing - The interface is in testing mode
and cannot transmit or receive regular
data.
• Standby - The interface is a backup
interface and cannot transmit or receive
packets unless the primary interface it
backs up fails.
• Disabled - The interface is disabled. It
cannot transmit or receive packets.
• Partially Down - The interface is up.
However, some interfaces (or PVCs)
layered on top of this interface are Down.
Some packets can be transmitted and
received.
IP Control Protocol. The state of IPCP for this
PPP session. IP packets can only be
transmitted and received over the PPP session
when the IPCP status is Open. Possible
statuses include:
• Open
• Not-Opened
- Basic information about the Channel Group.
85.
"Channel
Avaya C360 Manager User Guide