Accessing And Using The Veritas Remote Management Interface - VERITAS 5150 Hardware Installation Manual

Accessing and using the Veritas Remote
Management interface

Accessing and using the Veritas Remote Management interface

9
To save your BIOS changes, press F10.
10
Press Y to save and exit. The appliance restarts itself.
The IPMI web interface is known as Veritas Remote Management interface. You
can use Veritas Remote Management interface to log on to the appliance shell.
Before you use the remote management interface, the following prerequisites must
be met:
The Remote Management interface (IPMI port) must first be configured.
■
At least one power cable must be connected to a functioning power source.
■
At least one user must be enabled to use the LAN channel(s).
■
Installation procedures 32