Ip Source Guard Configuration Commands; Display Ip Source Binding - HP 6125G Command Reference Manual

IP source guard configuration commands

display ip source binding

Syntax
display ip source binding [ static ] [ interface interface-type interface-number | ip-address ip-address |
mac-address mac-address ] [ slot slot-number ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
static: Displays static IPv4 source guard entries. If you do not specify this keyword, the command displays
all static and dynamic IPv4 source guard entries.
interface interface-type interface-number: Displays IPv4 source guard entries of the interface specified by
its type and number.
ip-address ip-address: Displays IPv4 source guard entries of an IP address.
mac-address mac-address: Displays IPv4 source guard entries of an MAC address (in the format H-H-H).
slot slot-number: Displays IPv4 source guard entries on an IRF member switch. The slot-number argument
specifies the ID of an IRF member switch. The value range for the argument depends on the number of
member switches and their member IDs in the IRF fabric.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ip source binding to display IPv4 source guard entries.
Note the following when you do not use the static keyword: If you do not specify any other parameters
either, the command displays static and dynamic IPv4 binding entries on all ports.
Note the following when you use the static keyword: If you do not specify any other parameters, the
command displays all port-based static IPv4 binding entries.
Related commands: ip verify source and ip source binding.
Examples
# Display all IPv4 source guard entries.
<Sysname> display ip source binding
Total entries found: 3
246